THUNDERBEAT & SONICBEAT Assembly Guide
![](https://www.olympusprofed.com/wp-content/uploads/2018/01/0202_001-2.png)
![](https://www.olympusprofed.com/wp-content/uploads/2018/03/0202_002.png)
1 Insert the Thunderbeat or Sonicbeat transducer into the handle.
![](https://www.olympusprofed.com/wp-content/uploads/2018/03/0202_003.png)
2 While holding the transducer, turn the rotation knob clockwise until it stops. Do not rotate the transducer or the handle.
![](https://www.olympusprofed.com/wp-content/uploads/2018/03/0202_004.png)
3 Mount the stabilizer on the transducer.
![](https://www.olympusprofed.com/wp-content/uploads/2018/03/0202_005.png)
4 Attach the head of the torque wrench to the rotation knob.
![](https://www.olympusprofed.com/wp-content/uploads/2018/03/0202_006.png)
5 While holding only the stabilizer (not the handle) slowly turn the torque wrench clockwise until you hear a click. The transducer is now firmly in place. Remove the torque wrench and stabilizer.
![](https://www.olympusprofed.com/wp-content/uploads/2018/03/0202_007.png)
6 For disassembling the instrument and transducer, use the torque wrench to turn the rotation knob counterclockwise while holding the stabilizer.
* Some devices are not available in some areas.
** This sheet is for your reference only. Please refer to the instructions provided with the device for more precise instructions.
- Keyword
- Content Type